+ 0 km 0

Anúncio inactivo - foram encontrados anúncios semelhantes em Fresadoras em Batalha.

Controladora Cnc 6 Eixos Nova Nunca usada Batalha - imagem 1

Controladora Cnc 6 Eixos Nova Nunca usada

Troca
Descrição
Tenho controladora cnc Eding nova nunca foi usada.
CPU5B 6 axis
CPU5B Ethernet modulo

125 KHz step frequency.
Full 6 axes interpolation.
Euro card size 100x160mm.
5 status LED's.
6 Standard CNC outputs ( Tool, Tool direction, TOOL PWM, Flood coolant, Mist coolant, Charge PUMP for external watchdog)
9 Standard CNC inputs (6 Home inputs, Probe, Spindle sensor, 2 x E-Stop, External ERROR, Run, Pause, Hand wheel).
10 general purpose digital outputs (tool-changer).
2 Extra PWM outputs for motor speed or temperature control.
6 Extra digital Inputs (tool changer).
3 Extra analogue Inputs 3. The extra IO is controlled by M54, M55, M66.
Interface to PC is USB2.0.
Optional 100 Mbit Ethernet.
On board Power supply, input +9 – 24 Volt.
Field upgradable firmware.
Features

Shortest possible CNC production time, especially 3D work, depending on the product, USBCNC can be up to 2 times faster . This is thanks to the advanced Look Ahead Feed Algorithm that works for all motion segments, lines and circles by looking at their curvature and reduce speed only when absolutely necessary.
Simple one screen operation, UI designed for and by professional CNC operators.
Nesting mode execution for multiple production.
Optimized tooltip feed calculations for 4th axis milling, no tool breakage due to wrong tool-tip feed.
Feed Override control while running 0-300%.
Easy start half way in g-code file, using search method
Slave axes, for systems with dual motors (tandem) on X, Y or Z axis.
Special homing sequence for tandems, sets tandem straight.
Tangential knife, you need to program only X.Y coordinates and the tangential knife follows, also in circles and lifts automatically up when needed.
Backlash compensation.
Spindle proportional ramp-up time.
Collision detection when g-code job is loaded prevents machine damage.
Running time estimation when job is loaded.
Thread cutting (Lathe).
OpenGL graphics allows real-time PAN/ZOOM/ROTATE
G-code is EMC compatible, RS274NGC, can be used with all CAM software's so far.
G-code extensions with IF..THEN, WHILE..ENDWHILE, SUB ENDSUB, GOSUB.
G68, Zeroing with rotation, accurate setup of clamping device no longer necessary.
Super long file mode allows endless files, tested with 100.000.000 lines g-code.
User interaction from G-Code with DlgMsg command and a lot more.
Automatic tool change can be programmed entirely in G-code.
Pause, Jog away, resume run in middle of g-code run.
Hand wheel jog with position and velocity mode.
Build in 2D CAM for drilling, engraving, profiling and pocketing, reads DXF and HPGL.
SDK for building customized UI's.

- You can use long cables, upto 100 meter (USB maximal 5 meter)

- Very robust against EMC noise, therefore this mudule is often used with plasma cutters.

To use this module, it has to be mounted on the CPU5B, all mounting material is included.
Then the CPU5B Ethernet firmware must be downloaded to the board using the configurator tool.
The tool and manual and ethernet firmware are on the download page.
  • Publicado às 23:06, 16 Março 2021
  • Visualizações:205
  • ID do anúncio: 613849144