Amplificador Dynacord L1000
2x 500watt rms

Com rack acresce 50€

Specs
Max. Output Power - into 8 ohms : 2 x 370 W at 1 kHz / THD = 1.0%
Max. Output Power - into 4 ohms : 2 x 550 W at 1 kHz / THD = 1.0%
Max. Output Power - into 2 ohms : 2 x 650 W at 1 kHz / THD = 1.0%
Max. Output Power - into 8 ohms bridged : 1 x 1100 W at 1 kHz / THD = 1.0%
Max. Output Power - into 4 ohms bridged : 1 x 1300 W at 1 kHz / THD = 1.0%
Rated Output Power - into 8 ohms : 2 x 350 W at 20 Hz - 20 kHz / THD = 0.1 %
Rated Output Power - into 4 ohms : 2 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
Rated Output Power - into 2 ohms : 2 x 600 W at 20 Hz - 20 kHz / THD = 0.1 %
Rated Output Power - into 8 ohms bridged : 1 x 1000 W at 20 Hz - 20 kHz / THD = 0.1 %
Rated Output Power - into 4 ohms bridged : 1 x 1200 W at 20 Hz - 20 kHz / THD = 0.1 %
Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
Maximum Output Level : 66 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
Maximum Input Level : +21 dBu / 8.7 V
Input Impedance active balanced : 20 kohms
THD at Rated Output : 0.05 % MBW = 80.0 kHz, f = 1 kHz
IMD -SMPTE : 0.01 % 60 Hz, 7 kHz, at rated output
Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, A-weighted, RMS, input sensitivity +6 dBu
Attenuation at rated output : > 70 dB f = 1 kHz
Damping Factor internal 1 kHz : > 300
DIM 30 : 0.01 %
DIM 100 : 0.01 %
Slew Rate internal : > 30 V / µs
Power Consumption : 600 W 1/8 rated output into 4 ohms
Width : 483 mm
Height : 88.1 mm
Depth : 426 mm
Weight : 17 kg